How to use the IOptions pattern for configuration in ASP ...

Red Hat OpenShift Container Platform Instruction Manual for Windows Powershell

Introduction to the manual
This manual is made to guide you step by step in setting up an OpenShift cloud environment on your own device. It will tell you what needs to be done, when it needs to be done, what you will be doing and why you will be doing it, all in one convenient manual that is made for Windows users. Although if you'd want to try it on Linux or MacOS we did add the commands necesary to get the CodeReady Containers to run on your operating system. Be warned however there are some system requirements that are necessary to run the CodeReady Containers that we will be using. These requirements are specified within chapter Minimum system requirements.
This manual is written for everyone with an interest in the Red Hat OpenShift Container Platform and has at least a basic understanding of the command line within PowerShell on Windows. Even though it is possible to use most of the manual for Linux or MacOS we will focus on how to do this within Windows.
If you follow this manual you will be able to do the following items by yourself:
● Installing the CodeReady Containers
● Updating OpenShift
● Configuring a CodeReady Container
● Configuring the DNS
● Accessing the OpenShift cluster
● Deploying the Mediawiki application
What is the OpenShift Container platform?
Red Hat OpenShift is a cloud development Platform as a Service (PaaS). It enables developers to develop and deploy their applications on a cloud infrastructure. It is based on the Kubernetes platform and is widely used by developers and IT operations worldwide. The OpenShift Container platform makes use of CodeReady Containers. CodeReady Containers are pre-configured containers that can be used for developing and testing purposes. There are also CodeReady Workspaces, these workspaces are used to provide any member of the development or IT team with a consistent, secure, and zero-configuration development environment.
The OpenShift Container Platform is widely used because it helps the programmers and developers make their application faster because of CodeReady Containers and CodeReady Workspaces and it also allows them to test their application in the same environment. One of the advantages provided by OpenShift is the efficient container orchestration. This allows for faster container provisioning, deploying and management. It does this by streamlining and automating the automation process.
What knowledge is required or recommended to proceed with the installation?
To be able to follow this manual some knowledge is mandatory, because most of the commands are done within the Command Line interface it is necessary to know how it works and how you can browse through files/folders. If you either don’t have this basic knowledge or have trouble with the basic Command Line Interface commands from PowerShell, then a cheat sheet might offer some help. We recommend the following cheat sheet for windows:
Https://www.sans.org/security-resources/sec560/windows\_command\_line\_sheet\_v1.pdf
Another option is to read through the operating system’s documentation or introduction guides. Though the documentation can be overwhelming by the sheer amount of commands.
Microsoft: https://docs.microsoft.com/en-us/windows-serveadministration/windows-commands/windows-commands
MacOS
Https://www.makeuseof.com/tag/mac-terminal-commands-cheat-sheet/
Linux
https://ubuntu.com/tutorials/command-line-for-beginners#2-a-brief-history-lesson https://www.guru99.com/linux-commands-cheat-sheet.html
http://cc.iiti.ac.in/docs/linuxcommands.pdf
Aside from the required knowledge there are also some things that can be helpful to know just to make the use of OpenShift a bit simpler. This consists of some general knowledge on PaaS like Dockers and Kubernetes.
Docker https://www.docker.com/
Kubernetes https://kubernetes.io/

System requirements

Minimum System requirements

The minimum system requirements for the Red Hat OpenShift CodeReady Containers has the following minimum hardware:
Hardware requirements
Code Ready Containers requires the following system resources:
● 4 virtual CPU’s
● 9 GB of free random-access memory
● 35 GB of storage space
● Physical CPU with Hyper-V (intel) or SVM mode (AMD) this has to be enabled in the bios
Software requirements
The minimum system requirements for the Red Hat OpenShift CodeReady Containers has the following minimum operating system requirements:
Microsoft Windows
On Microsoft Windows, the Red Hat OpenShift CodeReady Containers requires the Windows 10 Pro Fall Creators Update (version 1709) or newer. CodeReady Containers does not work on earlier versions or other editions of Microsoft Windows. Microsoft Windows 10 Home Edition is not supported.
macOS
On macOS, the Red Hat OpenShift CodeReady Containers requires macOS 10.12 Sierra or newer.
Linux
On Linux, the Red Hat OpenShift CodeReady Containers is only supported on Red Hat Enterprise Linux/CentOS 7.5 or newer and on the latest two stable Fedora releases.
When using Red Hat Enterprise Linux, the machine running CodeReady Containers must be registered with the Red Hat Customer Portal.
Ubuntu 18.04 LTS or newer and Debian 10 or newer are not officially supported and may require manual set up of the host machine.

Required additional software packages for Linux

The CodeReady Containers on Linux require the libvirt and Network Manager packages to run. Consult the following table to find the command used to install these packages for your Linux distribution:
Table 1.1 Package installation commands by distribution
Linux Distribution Installation command
Fedora Sudo dnf install NetworkManager
Red Hat Enterprise Linux/CentOS Su -c 'yum install NetworkManager'
Debian/Ubuntu Sudo apt install qemu-kvm libvirt-daemonlibvirt-daemon-system network-manage

Installation

Getting started with the installation

To install CodeReady Containers a few steps must be undertaken. Because an OpenShift account is necessary to use the application this will be the first step. An account can be made on “https://www.openshift.com/”, where you need to press login and after that select the option “Create one now”
After making an account the next step is to download the latest release of CodeReady Containers and the pulled secret on “https://cloud.redhat.com/openshift/install/crc/installer-provisioned”. Make sure to download the version corresponding to your platform and/or operating system. After downloading the right version, the contents have to be extracted from the archive to a location in your $PATH. The pulled secret should be saved because it is needed later.
The command line interface has to be opened before we can continue with the installation. For windows we will use PowerShell. All the commands we use during the installation procedure of this guide are going to be done in this command line interface unless stated otherwise. To be able to run the commands within the command line interface, use the command line interface to go to the location in your $PATH where you extracted the CodeReady zip.
If you have installed an outdated version and you wish to update, then you can delete the existing CodeReady Containers virtual machine with the $crc delete command. After deleting the container, you must replace the old crc binary with a newly downloaded binary of the latest release.
C:\Users\[username]\$PATH>crc delete 
When you have done the previous steps please confirm that the correct and up to date crc binary is in use by checking it with the $crc version command, this should provide you with the version that is currently installed.
C:\Users\[username]\$PATH>crc version 
To set up the host operating system for the CodeReady Containers virtual machine you have to run the $crc setup command. After running crc setup, crc start will create a minimal OpenShift 4 cluster in the folder where the executable is located.
C:\Users\[username]>crc setup 

Setting up CodeReady Containers

Now we need to set up the new CodeReady Containers release with the $crc setup command. This command will perform the operations necessary to run the CodeReady Containers and create the ~/.crc directory if it did not previously exist. In the process you have to supply your pulled secret, once this process is completed you have to reboot your system. When the system has restarted you can start the new CodeReady Containers virtual machine with the $crc start command. The $crc start command starts the CodeReady virtual machine and OpenShift cluster.
You cannot change the configuration of an existing CodeReady Containers virtual machine. So if you have a CodeReady Containers virtual machine and you want to make configuration changes you need to delete the virtual machine with the $crc delete command and create a new virtual machine and start that one with the configuration changes. Take note that deleting the virtual machine will also delete the data stored in the CodeReady Containers. So, to prevent data loss we recommend you save the data you wish to keep. Also keep in mind that it is not necessary to change the default configuration to start OpenShift.
C:\Users\[username]\$PATH>crc setup 
Before starting the machine, you need to keep in mind that it is not possible to make any changes to the virtual machine. For this tutorial however it is not necessary to change the configuration, if you don’t want to make any changes please continue by starting the machine with the crc start command.
C:\Users\[username]\$PATH>crc start 
\ it is possible that you will get a Nameserver error later on, if this is the case please start it with* crc start -n 1.1.1.1

Configuration

It is not is not necessary to change the default configuration and continue with this tutorial, this chapter is here for those that wish to do so and know what they are doing. However, for MacOS and Linux it is necessary to change the dns settings.

Configuring the CodeReady Containers

To start the configuration of the CodeReady Containers use the command crc config. This command allows you to configure the crc binary and the CodeReady virtual machine. The command has some requirements before it’s able to configure. This requirement is a subcommand, the available subcommands for this binary and virtual machine are:
get, this command allows you to see the values of a configurable property
set/unset, this command can be used for 2 things. To display the names of, or to set and/or unset values of several options and parameters. These parameters being:
○ Shell options
○ Shell attributes
○ Positional parameters
view, this command starts the configuration in read-only mode.
These commands need to operate on named configurable properties. To list all the available properties, you can run the command $crc config --help.
Throughout this manual we will use the $crc config command a few times to change some properties needed for the configuration.
There is also the possibility to use the crc config command to configure the behavior of the checks that’s done by the $crc start end $crc setup commands. By default, the startup checks will stop with the process if their conditions are not met. To bypass this potential issue, you can set the value of a property that starts with skip-check or warn-check to true to skip the check or warning instead of ending up with an error.
C:\Users\[username]\$PATH>crc config get C:\Users\[username]\$PATH>crc config set C:\Users\[username]\$PATH>crc config unset C:\Users\[username]\$PATH>crc config view C:\Users\[username]\$PATH>crc config --help 

Configuring the Virtual Machine

You can use the CPUs and memory properties to configure the default number of vCPU’s and amount of memory available for the virtual machine.
To increase the number of vCPU’s available to the virtual machine use the $crc config set CPUs . Keep in mind that the default number for the CPU’s is 4 and the number of vCPU’s you wish to assign must be equal or greater than the default value.
To increase the memory available to the virtual machine, use the $crc config set memory . Keep in mind that the default number for the memory is 9216 Mebibytes and the amount of memory you wish to assign must be equal or greater than the default value.
C:\Users\[username]\$PATH>crc config set CPUs  C:\Users\[username]\$PATH>crc config set memory > 

Configuring the DNS

Window / General DNS setup

There are two domain names used by the OpenShift cluster that are managed by the CodeReady Containers, these are:
crc.testing, this is the domain for the core OpenShift services.
apps-crc.testing, this is the domain used for accessing OpenShift applications that are deployed on the cluster.
Configuring the DNS settings in Windows is done by executing the crc setup. This command automatically adjusts the DNS configuration on the system. When executing crc start additional checks to verify the configuration will be executed.

macOS DNS setup

MacOS expects the following DNS configuration for the CodeReady Containers
● The CodeReady Containers creates a file that instructs the macOS to forward all DNS requests for the testing domain to the CodeReady Containers virtual machine. This file is created at /etc/resolvetesting.
● The oc binary requires the following CodeReady Containers entry to function properly, api.crc.testing adds an entry to /etc/hosts pointing at the VM IPaddress.

Linux DNS setup

CodeReady containers expect a slightly different DNS configuration. CodeReady Container expects the NetworkManager to manage networking. On Linux the NetworkManager uses dnsmasq through a configuration file, namely /etc/NetworkManageconf.d/crc-nm-dnsmasq.conf.
To set it up properly the dnsmasq instance has to forward the requests for crc.testing and apps-crc.testing domains to “192.168.130.11”. In the /etc/NetworkManageconf.d/crc-nm-dnsmasq.conf this will look like the following:
● Server=/crc. Testing/192.168.130.11
● Server=/apps-crc. Testing/192.168.130.11

Accessing the Openshift Cluster

Accessing the Openshift web console

To gain access to the OpenShift cluster running in the CodeReady virtual machine you need to make sure that the virtual machine is running before continuing with this chapter. The OpenShift clusters can be accessed through the OpenShift web console or the client binary(oc).
First you need to execute the $crc console command, this command will open your web browser and direct a tab to the web console. After that, you need to select the htpasswd_provider option in the OpenShift web console and log in as a developer user with the output provided by the crc start command.
It is also possible to view the password for kubeadmin and developer users by running the $crc console --credentials command. While you can access the cluster through the kubeadmin and developer users, it should be noted that the kubeadmin user should only be used for administrative tasks such as user management and the developer user for creating projects or OpenShift applications and the deployment of these applications.
C:\Users\[username]\$PATH>crc console C:\Users\[username]\$PATH>crc console --credentials 

Accessing the OpenShift cluster with oc

To gain access to the OpenShift cluster with the use of the oc command you need to complete several steps.
Step 1.
Execute the $crc oc-env command to print the command needed to add the cached oc binary to your PATH:
C:\Users\[username]\$PATH>crc oc-env 
Step 2.
Execute the printed command. The output will look something like the following:
PS C:\Users\OpenShift> crc oc-env $Env:PATH = "CC:\Users\OpenShift\.crc\bin\oc;$Env:PATH" # Run this command to configure your shell: # & crc oc-env | Invoke-Expression 
This means we have to execute* the command that the output gives us, in this case that is:
C:\Users\[username]\$PATH>crc oc-env | Invoke-Expression 
\this has to be executed every time you start; a solution is to move the oc binary to the same path as the crc binary*
To test if this step went correctly execute the following command, if it returns without errors oc is set up properly
C:\Users\[username]\$PATH>.\oc 
Step 3
Now you need to login as a developer user, this can be done using the following command:
$oc login -u developer https://api.crc.testing:6443
Keep in mind that the $crc start will provide you with the password that is needed to login with the developer user.
C:\Users\[username]\$PATH>oc login -u developer https://api.crc.testing:6443 
Step 4
The oc can now be used to interact with your OpenShift cluster. If you for instance want to verify if the OpenShift cluster Operators are available, you can execute the command
$oc get co 
Keep in mind that by default the CodeReady Containers disables the functions provided by the commands $machine-config and $monitoringOperators.
C:\Users\[username]\$PATH>oc get co 

Demonstration

Now that you are able to access the cluster, we will take you on a tour through some of the possibilities within OpenShift Container Platform.
We will start by creating a project. Within this project we will import an image, and with this image we are going to build an application. After building the application we will explain how upscaling and downscaling can be used within the created application.
As the next step we will show the user how to make changes in the network route. We also show how monitoring can be used within the platform, however within the current version of CodeReady Containers this has been disabled.
Lastly, we will show the user how to use user management within the platform.

Creating a project

To be able to create a project within the console you have to login on the cluster. If you have not yet done this, this can be done by running the command crc console in the command line and logging in with the login data from before.
When you are logged in as admin, switch to Developer. If you're logged in as a developer, you don't have to switch. Switching between users can be done with the dropdown menu top left.
Now that you are properly logged in press the dropdown menu shown in the image below, from there click on create a project.
https://preview.redd.it/ytax8qocitv51.png?width=658&format=png&auto=webp&s=72d143733f545cf8731a3cca7cafa58c6507ace2
When you press the correct button, the following image will pop up. Here you can give your project a name and description. We chose to name it CodeReady with a displayname CodeReady Container.
https://preview.redd.it/vtaxadwditv51.png?width=594&format=png&auto=webp&s=e3b004bab39fb3b732d96198ed55fdd99259f210

Importing image

The Containers in OpenShift Container Platform are based on OCI or Docker formatted images. An image is a binary that contains everything needed to run a container as well as the metadata of the requirements needed for the container.
Within the OpenShift Container Platform it’s possible to obtain images in a number of ways. There is an integrated Docker registry that offers the possibility to download new images “on the fly”. In addition, OpenShift Container Platform can use third party registries such as:
- Https://hub.docker.com/
- Https://catalog.redhat.com/software/containers/search
Within this manual we are going to import an image from the Red Hat container catalog. In this example we’ll be using MediaWiki.
Search for the application in https://catalog.redhat.com/software/containers/search

https://preview.redd.it/c4mrbs0fitv51.png?width=672&format=png&auto=webp&s=f708f0542b53a9abf779be2d91d89cf09e9d2895
Navigate to “Get this image”
Follow the steps to “create a registry service account”, after that you can copy the YAML.
https://preview.redd.it/b4rrklqfitv51.png?width=1323&format=png&auto=webp&s=7a2eb14a3a1ba273b166e03e1410f06fd9ee1968
After the YAML has been copied we will go to the topology view and click on the YAML button
https://preview.redd.it/k3qzu8dgitv51.png?width=869&format=png&auto=webp&s=b1fefec67703d0a905b00765f0047fe7c6c0735b
Then we have to paste in the YAML, put in the name, namespace and your pull secret name (which you created through your registry account) and click on create.
https://preview.redd.it/iz48kltgitv51.png?width=781&format=png&auto=webp&s=4effc12e07bd294f64a326928804d9a931e4d2bd
Run the import command within powershell
$oc import-image openshift4/mediawiki --from=registry.redhat.io/openshift4/mediawiki --confirm imagestream.image.openshift.io/mediawiki imported 

Creating and managing an application

There are a few ways to create and manage applications. Within this demonstration we’ll show how to create an application from the previously imported image.

Creating the application

To create an image with the previously imported image go back to the console and topology. From here on select container image.
https://preview.redd.it/6506ea4iitv51.png?width=869&format=png&auto=webp&s=c0231d70bb16c76cd131e6b71256e93550cc8b37
For the option image you'll want to select the “image stream tag from internal registry” option. Give the application a name and then create the deployment.
https://preview.redd.it/tk72idniitv51.png?width=813&format=png&auto=webp&s=a4e662cf7b96604d84df9d04ab9b90b5436c803c
If everything went right during the creating process you should see the following, this means that the application is successfully running.
https://preview.redd.it/ovv9l85jitv51.png?width=901&format=png&auto=webp&s=f78f350207add0b8a979b6da931ff29ffa30128c

Scaling the application

In OpenShift there is a feature called autoscaling. There are two types of application scaling, namely vertical scaling, and horizontal scaling. Vertical scaling is adding only more CPU and hard disk and is no longer supported by OpenShift. Horizontal scaling is increasing the number of machines.
One of the ways to scale an application is by increasing the number of pods. This can be done by going to a pod within the view as seen in the previous step. By either pressing the up or down arrow more pods of the same application can be added. This is similar to horizontal scaling and can result in better performance when there are a lot of active users at the same time.
https://preview.redd.it/s6i1vbcrltv51.png?width=602&format=png&auto=webp&s=e62cbeeed116ba8c55704d61a990fc0d8f3cfaa1
In the picture above we see the number of nodes and pods and how many resources those nodes and pods are using. This is something to keep in mind if you want to scale up your application, the more you scale it up, the more resources it will take up.

https://preview.redd.it/quh037wmitv51.png?width=194&format=png&auto=webp&s=5e326647b223f3918c259b1602afa1b5fbbeea94

Network

Since OpenShift Container platform is built on Kubernetes it might be interesting to know some theory about its networking. Kubernetes, on which the OpenShift Container platform is built, ensures that the Pods within OpenShift can communicate with each other via the network and assigns them their own IP address. This makes all containers within the Pod behave as if they were on the same host. By giving each pod its own IP address, pods can be treated as physical hosts or virtual machines in terms of port mapping, networking, naming, service discovery, load balancing, application configuration and migration. To run multiple services such as front-end and back-end services, OpenShift Container Platform has a built-in DNS.
One of the changes that can be made to the networking of a Pod is the Route. We’ll show you how this can be done in this demonstration.
The Route is not the only thing that can be changed and or configured. Two other options that might be interesting but will not be demonstrated in this manual are:
- Ingress controller, Within OpenShift it is possible to set your own certificate. A user must have a certificate / key pair in PEM-encoded files, with the certificate signed by a trusted authority.
- Network policies, by default all pods in a project are accessible from other pods and network locations. To isolate one or more pods in a project, it is possible to create Network Policy objects in that project to indicate the allowed incoming connections. Project administrators can create and delete Network Policy objects within their own project.
There is a search function within the Container Platform. We’ll use this to search for the network routes and show how to add a new route.
https://preview.redd.it/8jkyhk8pitv51.png?width=769&format=png&auto=webp&s=9a8762df5bbae3d8a7c92db96b8cb70605a3d6da
You can add items that you use a lot to the navigation
https://preview.redd.it/t32sownqitv51.png?width=1598&format=png&auto=webp&s=6aab6f17bc9f871c591173493722eeae585a9232
For this example, we will add Routes to navigation.
https://preview.redd.it/pm3j7ljritv51.png?width=291&format=png&auto=webp&s=bc6fbda061afdd0780bbc72555d809b84a130b5b
Now that we’ve added Routes to the navigation, we can start the creation of the Route by clicking on “Create route”.
https://preview.redd.it/5lgecq0titv51.png?width=1603&format=png&auto=webp&s=d548789daaa6a8c7312a419393795b52da0e9f75
Fill in the name, select the service and the target port from the drop-down menu and click on Create.
https://preview.redd.it/qczgjc2uitv51.png?width=778&format=png&auto=webp&s=563f73f0dc548e3b5b2319ca97339e8f7b06c9d6
As you can see, we’ve successfully added the new route to our application.
https://preview.redd.it/gxfanp2vitv51.png?width=1588&format=png&auto=webp&s=1aae813d7ad0025f91013d884fcf62c5e7d109f1
Storage
OpenShift makes use of Persistent Storage, this type of storage uses persistent volume claims(PVC). PVC’s allow the developer to make persistent volumes without needing any knowledge about the underlying infrastructure.
Within this storage there are a few configuration options:
It is however important to know how to manually reclaim the persistent volumes, since if you delete PV the associated data will not be automatically deleted with it and therefore you cannot reassign the storage to another PV yet.
To manually reclaim the PV, you need to follow the following steps:
Step 1: Delete the PV, this can be done by executing the following command
$oc delete  
Step 2: Now you need to clean up the data on the associated storage asset
Step 3: Now you can delete the associated storage asset or if you with to reuse the same storage asset you can now create a PV with the storage asset definition.
It is also possible to directly change the reclaim policy within OpenShift, to do this you would need to follow the following steps:
Step 1: Get a list of the PVs in your cluster
$oc get pv 
This will give you a list of all the PV’s in your cluster and will display their following attributes: Name, Capacity, Accesmodes, Reclaimpolicy, Statusclaim, Storageclass, Reason and Age.
Step 2: Now choose the PV you wish to change and execute one of the following command’s, depending on your preferred policy:
$oc patch pv  -p '{"spec":{"persistentVolumeReclaimPolicy":"Retain"}}' 
In this example the reclaim policy will be changed to Retain.
$oc patch pv  -p '{"spec":{"persistentVolumeReclaimPolicy":"Recycle"}}' 
In this example the reclaim policy will be changed to Recycle.
$oc patch pv  -p '{"spec":{"persistentVolumeReclaimPolicy":"Delete"}}' 
In this example the reclaim policy will be changed to Delete.

Step 3: After this you can check the PV to verify the change by executing this command again:
$oc get pv 

Monitoring

Within Red Hat OpenShift there is the possibility to monitor the data that has been created by your containers, applications, and pods. To do so, click on the menu option in the top left corner. Check if you are logged in as Developer and click on “Monitoring”. Normally this function is not activated within the CodeReady containers, because it uses a lot of resources (Ram and CPU) to run.
https://preview.redd.it/an0wvn6zitv51.png?width=228&format=png&auto=webp&s=51abf8cc31bd763deb457d49514f99ee81d610ec
Once you have activated “Monitoring” you can change the “Time Range” and “Refresh Interval” in the top right corner of your screen. This will change the monitoring data on your screen.
https://preview.redd.it/e0yvzsh1jtv51.png?width=493&format=png&auto=webp&s=b2c563635cfa60ea7ce2f9c146aa994df6aa1c34
Within this function you can also monitor “Events”. These events are records of important information and are useful for monitoring and troubleshooting within the OpenShift Container Platform.
https://preview.redd.it/l90vkmp3jtv51.png?width=602&format=png&auto=webp&s=4e97f14bedaec7ededcdcda96e7823f77ced24c2

User management

According to the documentation of OpenShift is a user, an entity that interacts with the OpenShift Container Platform API. These can be a developer for developing applications or an administrator for managing the cluster. Users can be assigned to groups, which set the permissions applied to all the group’s members. For example, you can give API access to a group, which gives all members of the group API access.
There are multiple ways to create a user depending on the configured identity provider. The DenyAll identity provider is the default within OpenShift Container Platform. This default denies access for all the usernames and passwords.
First, we’re going to create a new user, the way this is done depends on the identity provider, this depends on the mapping method used as part of the identity provider configuration.
for more information on what mapping methods are and how they function:
https://docs.openshift.com/enterprise/3.1/install_config/configuring_authentication.html
With the default mapping method, the steps will be as following
$oc create user  
Next up, we’ll create an OpenShift Container Platform Identity. Use the name of the identity provider and the name that uniquely represents this identity in the scope of the identity provider:
$oc create identity : 
The is the name of the identity provider in the master configuration. For example, the following commands create an Identity with identity provider ldap_provider and the identity provider username mediawiki_s.
$oc create identity ldap_provider:mediawiki_s 
Create a useidentity mapping for the created user and identity:
$oc create useridentitymapping :  
For example, the following command maps the identity to the user:
$oc create useridentitymapping ldap_provider:mediawiki_s mediawiki 
Now were going to assign a role to this new user, this can be done by executing the following command:
$oc create clusterrolebinding  \ --clusterrole= --user= 
There is a --clusterrole option that can be used to give the user a specific role, like a cluster user with admin privileges. The cluster admin has access to all files and is able to manage the access level of other users.
Below is an example of the admin clusterrole command:
$oc create clusterrolebinding registry-controller \ --clusterrole=cluster-admin --user=admin 

What did you achieve?

If you followed all the steps within this manual you now should have a functioning Mediawiki Application running on your own CodeReady Containers. During the installation of this application on CodeReady Containers you have learned how to do the following things:
● Installing the CodeReady Containers
● Updating OpenShift
● Configuring a CodeReady Container
● Configuring the DNS
● Accessing the OpenShift cluster
● Deploying an application
● Creating new users
With these skills you’ll be able to set up your own Container Platform environment and host applications of your choosing.

Troubleshooting

Nameserver
There is the possibility that your CodeReady container can't connect to the internet due to a Nameserver error. When this is encountered a working fix for us was to stop the machine and then start the CRC machine with the following command:
C:\Users\[username]\$PATH>crc start -n 1.1.1.1 
Hyper-V admin
Should you run into a problem with Hyper-V it might be because your user is not an admin and therefore can’t access the Hyper-V admin user group.
  1. Click Start > Control Panel > Administration Tools > Computer Management. The Computer Management window opens.
  2. Click System Tools > Local Users and Groups > Groups. The list of groups opens.
  3. Double-click the Hyper-V Administrators group. The Hyper-V Administrators Properties window opens.
  4. Click Add. The Select Users or Groups window opens.
  5. In the Enter the object names to select field, enter the user account name to whom you want to assign permissions, and then click OK.
  6. Click Apply, and then click OK.

Terms and definitions

These terms and definitions will be expanded upon, below you can see an example of how this is going to look like together with a few terms that will require definitions.
Kubernetes is an open-source system for automating deployment, scaling, and management of containerized applications. Openshift is based on Kubernetes.
Clusters are a collection of multiple nodes which communicate with each other to perform a set of operations.
Containers are the basic units of OpenShift applications. These container technologies are lightweight mechanisms for isolating running processes so that they are limited to interacting with only their designated resources.
CodeReady Container is a minimal, preconfigured cluster that is used for development and testing purposes.
CodeReady Workspaces uses Kubernetes and containers to provide any member of the development or IT team with a consistent, secure, and zero-configuration development environment.

Sources

  1. https://www.ibm.com/support/knowledgecenteen/SSMKFH/com.ibm.apmaas.doc/install/hyperv_config_add_nonadmin_user_hyperv_usergroup.html
  2. https://access.redhat.com/documentation/en-us/openshift_container_platform/4.5/
  3. https://docs.openshift.com/container-platform/3.11/admin_guide/manage_users.html
submitted by Groep6HHS to openshift [link] [comments]

First Time Going Through Coding Interviews?

This post draws on my personal experiences and challenges over the past term at school, which I entered with hardly any knowledge of DSA (data structures and algorithms) and problem-solving strategies. As a self-taught programmer, I was a lot more familiar and comfortable with general programming, such as object-oriented programming, than with the problem-solving skills required in DSA questions.
This post reflects my journey throughout the term and the resources I turned to in order to quickly improve for my coding interview.
Here're some common questions and answers
What's the interview process like at a tech company?
Good question. It's actually pretty different from most other companies.

(What It's Like To Interview For A Coding Job

First time interviewing for a tech job? Not sure what to expect? This article is for you.

Here are the usual steps:

  1. First, you’ll do a non-technical phone screen.
  2. Then, you’ll do one or a few technical phone interviews.
  3. Finally, the last step is an onsite interview.
Some companies also throw in a take-home code test—sometimes before the technical phone interviews, sometimes after.
Let’s walk through each of these steps.

The non-technical phone screen

This first step is a quick call with a recruiter—usually just 10–20 minutes. It's very casual.
Don’t expect technical questions. The recruiter probably won’t be a programmer.
The main goal is to gather info about your job search. Stuff like:

  1. Your timeline. Do you need to sign an offer in the next week? Or are you trying to start your new job in three months?
  2. What’s most important to you in your next job. Great team? Flexible hours? Interesting technical challenges? Room to grow into a more senior role?
  3. What stuff you’re most interested in working on. Front end? Back end? Machine learning?
Be honest about all this stuff—that’ll make it easier for the recruiter to get you what you want.
One exception to that rule: If the recruiter asks you about your salary expectations on this call, best not to answer. Just say you’d rather talk about compensation after figuring out if you and the company are a good fit. This’ll put you in a better negotiating position later on.

The technical phone interview(s)

The next step is usually one or more hour-long technical phone interviews.
Your interviewer will call you on the phone or tell you to join them on Skype or Google Hangouts. Make sure you can take the interview in a quiet place with a great internet connection. Consider grabbing a set of headphones with a good microphone or a bluetooth earpiece. Always test your hardware beforehand!
The interviewer will want to watch you code in real time. Usually that means using a web-based code editor like Coderpad or collabedit. Run some practice problems in these tools ahead of time, to get used to them. Some companies will just ask you to share your screen through Google Hangouts or Skype.
Turn off notifications on your computer before you get started—especially if you’re sharing your screen!
Technical phone interviews usually have three parts:

  1. Beginning chitchat (5–10 minutes)
  2. Technical challenges (30–50 minutes)
  3. Your turn to ask questions (5–10 minutes)
The beginning chitchat is half just to help your relax, and half actually part of the interview. The interviewer might ask some open-ended questions like:

  1. Tell me about yourself.
  2. Tell me about something you’ve built that you’re particularly proud of.
  3. I see this project listed on your resume—tell me more about that.
You should be able to talk at length about the major projects listed on your resume. What went well? What didn’t? How would you do things differently now?
Then come the technical challenges—the real meet of the interview. You’ll spend most of the interview on this. You might get one long question, or several shorter ones.
What kind of questions can you expect? It depends.
Startups tend to ask questions aimed towards building or debugging code. (“Write a function that takes two rectangles and figures out if they overlap.”). They’ll care more about progress than perfection.
Larger companies will want to test your general know-how of data structures and algorithms (“Write a function that checks if a binary tree is ‘balanced’ in O(n)O(n) ↴ time.”). They’ll care more about how you solve and optimize a problem.
With these types of questions, the most important thing is to be communicating with your interviewer throughout. You'll want to "think out loud" as you work through the problem. For more info, check out our more detailed step-by-step tips for coding interviews.
If the role requires specific languages or frameworks, some companies will ask trivia-like questions (“In Python, what’s the ‘global interpreter lock’?”).
After the technical questions, your interviewer will open the floor for you to ask them questions. Take some time before the interview to comb through the company’s website. Think of a few specific questions about the company or the role. This can really make you stand out.
When you’re done, they should give you a timeframe on when you’ll hear about next steps. If all went well, you’ll either get asked to do another phone interview, or you’ll be invited to their offices for an onsite.

The onsite interview

An onsite interview happens in person, at the company’s office. If you’re not local, it’s common for companies to pay for a flight and hotel room for you.
The onsite usually consists of 2–6 individual, one-on-one technical interviews (usually in a small conference room). Each interview will be about an hour and have the same basic form as a phone screen—technical questions, bookended by some chitchat at the beginning and a chance for you to ask questions at the end.
The major difference between onsite technical interviews and phone interviews though: you’ll be coding on a whiteboard.
This is awkward at first. No autocomplete, no debugging tools, no delete button…ugh. The good news is, after some practice you get used to it. Before your onsite, practice writing code on a whiteboard (in a pinch, a pencil and paper are fine). Some tips:

  1. Start in the top-most left corner of the whiteboard. This gives you the most room. You’ll need more space than you think.
  2. Leave a blank line between each line as you write your code. Makes it much easier to add things in later.
  3. Take an extra second to decide on your variable names. Don’t rush this part. It might seem like a waste of time, but using more descriptive variable names ultimately saves you time because it makes you less likely to get confused as you write the rest of your code.
If a technical phone interview is a sprint, an onsite is a marathon. The day can get really long. Best to keep it open—don’t make other plans for the afternoon or evening.
When things go well, you’ wrap-up by chatting with the CEO or some other director. This is half an interview, half the company trying to impress you. They may invite you to get drinks with the team after hours.
All told, a long day of onsite interviews could look something like this:

If they let you go after just a couple interviews, it’s usually a sign that they’re going to pass on you. That’s okay—it happens!
There are are a lot of easy things you can do the day before and morning of your interview to put yourself in the best possible mindset. Check out our piece on what to do in the 24 hours before your onsite coding interview.

The take-home code test

Code tests aren’t ubiquitous, but they seem to be gaining in popularity. They’re far more common at startups, or places where your ability to deliver right away is more important than your ability to grow.
You’ll receive a description of an app or service, a rough time constraint for writing your code, and a deadline for when to turn it in. The deadline is usually negotiable.
Here's an example problem:
Write a basic “To-Do” app. Unit test the core functionality. As a bonus, add a “reminders” feature. Try to spend no more than 8 hours on it, and send in what you have by Friday with a small write-up.
Take a crack at the “bonus” features if they include any. At the very least, write up how you would implement it.
If they’re hiring for people with knowledge of a particular framework, they might tell you what tech to use. Otherwise, it’ll be up to you. Use what you’re most comfortable with. You want this code to show you at your best.
Some places will offer to pay you for your time. It's rare, but some places will even invite you to work with them in their office for a few days, as a "trial.")
Do I need to know this "big O" stuff?
Big O notation is the language we use for talking about the efficiency of data structures and algorithms.
Will it come up in your interviews? Well, it depends. There are different types of interviews.
There’s the classic algorithmic coding interview, sometimes called the “Google-style whiteboard interview.” It’s focused on data structures and algorithms (queues and stacks, binary search, etc).
That’s what our full course prepares you for. It's how the big players interview. Google, Facebook, Amazon, Microsoft, Oracle, LinkedIn, etc.
For startups and smaller shops, it’s a mixed bag. Most will ask at least a few algorithmic questions. But they might also include some role-specific stuff, like Java questions or SQL questions for a backend web engineer. They’ll be especially interested in your ability to ship code without much direction. You might end up doing a code test or pair-programming exercise instead of a whiteboarding session.
To make sure you study for the right stuff, you should ask your recruiter what to expect. Send an email with a question like, “Is this interview going to cover data structures and algorithms? Or will it be more focused around coding in X language.” They’ll be happy to tell you.
If you've never learned about data structures and algorithms, or you're feeling a little rusty, check out our Intuitive Guide to Data Structures and Algorithms.
Which programming language should I use?
Companies usually let you choose, in which case you should use your most comfortable language. If you know a bunch of languages, prefer one that lets you express more with fewer characters and fewer lines of code, like Python or Ruby. It keeps your whiteboard cleaner.
Try to stick with the same language for the whole interview, but sometimes you might want to switch languages for a question. E.g., processing a file line by line will be far easier in Python than in C++.
Sometimes, though, your interviewer will do this thing where they have a pet question that’s, for example, C-specific. If you list C on your resume, they’ll ask it.
So keep that in mind! If you’re not confident with a language, make that clear on your resume. Put your less-strong languages under a header like ‘Working Knowledge.’
What should I wear?
A good rule of thumb is to dress a tiny step above what people normally wear to the office. For most west coast tech companies, the standard digs are just jeans and a t-shirt. Ask your recruiter what the office is like if you’re worried about being too casual.
Should I send a thank-you note?
Thank-you notes are nice, but they aren’t really expected. Be casual if you send one. No need for a hand-calligraphed note on fancy stationery. Opt for a short email to your recruiter or the hiring manager. Thank them for helping you through the process, and ask them to relay your thanks to your interviewers.
1) Coding Interview Tips
How to get better at technical interviews without practicing
Chitchat like a pro.
Before diving into code, most interviewers like to chitchat about your background. They're looking for:

You should have at least one:

Nerd out about stuff. Show you're proud of what you've done, you're amped about what they're doing, and you have opinions about languages and workflows.
Communicate.
Once you get into the coding questions, communication is key. A candidate who needed some help along the way but communicated clearly can be even better than a candidate who breezed through the question.
Understand what kind of problem it is. There are two types of problems:

  1. Coding. The interviewer wants to see you write clean, efficient code for a problem.
  2. Chitchat. The interviewer just wants you to talk about something. These questions are often either (1) high-level system design ("How would you build a Twitter clone?") or (2) trivia ("What is hoisting in Javascript?"). Sometimes the trivia is a lead-in for a "real" question e.g., "How quickly can we sort a list of integers? Good, now suppose instead of integers we had . . ."
If you start writing code and the interviewer just wanted a quick chitchat answer before moving on to the "real" question, they'll get frustrated. Just ask, "Should we write code for this?"
Make it feel like you're on a team. The interviewer wants to know what it feels like to work through a problem with you, so make the interview feel collaborative. Use "we" instead of "I," as in, "If we did a breadth-first search we'd get an answer in O(n)O(n) time." If you get to choose between coding on paper and coding on a whiteboard, always choose the whiteboard. That way you'll be situated next to the interviewer, facing the problem (rather than across from her at a table).
Think out loud. Seriously. Say, "Let's try doing it this way—not sure yet if it'll work." If you're stuck, just say what you're thinking. Say what might work. Say what you thought could work and why it doesn't work. This also goes for trivial chitchat questions. When asked to explain Javascript closures, "It's something to do with scope and putting stuff in a function" will probably get you 90% credit.
Say you don't know. If you're touching on a fact (e.g., language-specific trivia, a hairy bit of runtime analysis), don't try to appear to know something you don't. Instead, say "I'm not sure, but I'd guess $thing, because...". The because can involve ruling out other options by showing they have nonsensical implications, or pulling examples from other languages or other problems.
Slow the eff down. Don't confidently blurt out an answer right away. If it's right you'll still have to explain it, and if it's wrong you'll seem reckless. You don't win anything for speed and you're more likely to annoy your interviewer by cutting her off or appearing to jump to conclusions.
Get unstuck.
Sometimes you'll get stuck. Relax. It doesn't mean you've failed. Keep in mind that the interviewer usually cares more about your ability to cleverly poke the problem from a few different angles than your ability to stumble into the correct answer. When hope seems lost, keep poking.
Draw pictures. Don't waste time trying to think in your head—think on the board. Draw a couple different test inputs. Draw how you would get the desired output by hand. Then think about translating your approach into code.
Solve a simpler version of the problem. Not sure how to find the 4th largest item in the set? Think about how to find the 1st largest item and see if you can adapt that approach.
Write a naive, inefficient solution and optimize it later. Use brute force. Do whatever it takes to get some kind of answer.
Think out loud more. Say what you know. Say what you thought might work and why it won't work. You might realize it actually does work, or a modified version does. Or you might get a hint.
Wait for a hint. Don't stare at your interviewer expectantly, but do take a brief second to "think"—your interviewer might have already decided to give you a hint and is just waiting to avoid interrupting.
Think about the bounds on space and runtime. If you're not sure if you can optimize your solution, think about it out loud. For example:

Get your thoughts down.
It's easy to trip over yourself. Focus on getting your thoughts down first and worry about the details at the end.
Call a helper function and keep moving. If you can't immediately think of how to implement some part of your algorithm, big or small, just skip over it. Write a call to a reasonably-named helper function, say "this will do X" and keep going. If the helper function is trivial, you might even get away with never implementing it.
Don't worry about syntax. Just breeze through it. Revert to English if you have to. Just say you'll get back to it.
Leave yourself plenty of room. You may need to add code or notes in between lines later. Start at the top of the board and leave a blank line between each line.
Save off-by-one checking for the end. Don't worry about whether your for loop should have "<<" or "<=<=." Write a checkmark to remind yourself to check it at the end. Just get the general algorithm down.
Use descriptive variable names. This will take time, but it will prevent you from losing track of what your code is doing. Use names_to_phone_numbers instead of nums. Imply the type in the name. Functions returning booleans should start with "is_*". Vars that hold a list should end with "s." Choose standards that make sense to you and stick with them.
Clean up when you're done.
Walk through your solution by hand, out loud, with an example input. Actually write down what values the variables hold as the program is running—you don't win any brownie points for doing it in your head. This'll help you find bugs and clear up confusion your interviewer might have about what you're doing.
Look for off-by-one errors. Should your for loop use a "<=<=" instead of a "<<"?
Test edge cases. These might include empty sets, single-item sets, or negative numbers. Bonus: mention unit tests!
Don't be boring. Some interviewers won't care about these cleanup steps. If you're unsure, say something like, "Then I'd usually check the code against some edge cases—should we do that next?"
Practice.
In the end, there's no substitute for running practice questions.
Actually write code with pen and paper. Be honest with yourself. It'll probably feel awkward at first. Good. You want to get over that awkwardness now so you're not fumbling when it's time for the real interview.

2) Tricks For Getting Unstuck During a Coding Interview
Getting stuck during a coding interview is rough.
If you weren’t in an interview, you might take a break or ask Google for help. But the clock is ticking, and you don’t have Google.
You just have an empty whiteboard, a smelly marker, and an interviewer who’s looking at you expectantly. And all you can think about is how stuck you are.
You need a lifeline for these moments—like a little box that says “In Case of Emergency, Break Glass.”
Inside that glass box? A list of tricks for getting unstuck. Here’s that list of tricks.
When you’re stuck on getting started
1) Write a sample input on the whiteboard and turn it into the correct output "by hand." Notice the process you use. Look for patterns, and think about how to implement your process in code.
Trying to reverse a string? Write “hello” on the board. Reverse it “by hand”—draw arrows from each character’s current position to its desired position.
Notice the pattern: it looks like we’re swapping pairs of characters, starting from the outside and moving in. Now we’re halfway to an algorithm.
2) Solve a simpler version of the problem. Remove or simplify one of the requirements of the problem. Once you have a solution, see if you can adapt that approach for the original question.
Trying to find the k-largest element in a set? Walk through finding the largest element, then the second largest, then the third largest. Generalizing from there to find the k-largest isn’t so bad.
3) Start with an inefficient solution. Even if it feels stupidly inefficient, it’s often helpful to start with something that’ll return the right answer. From there, you just have to optimize your solution. Explain to your interviewer that this is only your first idea, and that you suspect there are faster solutions.
Suppose you were given two lists of sorted numbers and asked to find the median of both lists combined. It’s messy, but you could simply:

  1. Concatenate the arrays together into a new array.
  2. Sort the new array.
  3. Return the value at the middle index.
Notice that you could’ve also arrived at this algorithm by using trick (2): Solve a simpler version of the problem. “How would I find the median of one sorted list of numbers? Just grab the item at the middle index. Now, can I adapt that approach for getting the median of two sorted lists?”
When you’re stuck on finding optimizations
1) Look for repeat work. If your current solution goes through the same data multiple times, you’re doing unnecessary repeat work. See if you can save time by looking through the data just once.
Say that inside one of your loops, there’s a brute-force operation to find an element in an array. You’re repeatedly looking through items that you don’t have to. Instead, you could convert the array to a lookup table to dramatically improve your runtime.
2) Look for hints in the specifics of the problem. Is the input array sorted? Is the binary tree balanced? Details like this can carry huge hints about the solution. If it didn’t matter, your interviewer wouldn’t have brought it up. It’s a strong sign that the best solution to the problem exploits it.
Suppose you’re asked to find the first occurrence of a number in a sorted array. The fact that the array is sorted is a strong hint—take advantage of that fact by using a binary search.

Sometimes interviewers leave the question deliberately vague because they want you to ask questions to unearth these important tidbits of context. So ask some questions at the beginning of the problem.
3) Throw some data structures at the problem. Can you save time by using the fast lookups of a hash table? Can you express the relationships between data points as a graph? Look at the requirements of the problem and ask yourself if there’s a data structure that has those properties.
4) Establish bounds on space and runtime. Think out loud about the parameters of the problem. Try to get a sense for how fast your algorithm could possibly be:

When All Else Fails
1) Make it clear where you are. State what you know, what you’re trying to do, and highlight the gap between the two. The clearer you are in expressing exactly where you’re stuck, the easier it is for your interviewer to help you.
2) Pay attention to your interviewer. If she asks a question about something you just said, there’s probably a hint buried in there. Don’t worry about losing your train of thought—drop what you’re doing and dig into her question.
Relax. You’re supposed to get stuck.
Interviewers choose hard problems on purpose. They want to see how you poke at a problem you don’t immediately know how to solve.
Seriously. If you don’t get stuck and just breeze through the problem, your interviewer’s evaluation might just say “Didn’t get a good read on candidate’s problem-solving process—maybe she’d already seen this interview question before?”
On the other hand, if you do get stuck, use one of these tricks to get unstuck, and communicate clearly with your interviewer throughout...that’s how you get an evaluation like, “Great problem-solving skills. Hire.”

3) Fixing Impostor Syndrome in Coding Interviews
“It's a fluke that I got this job interview...”
“I studied for weeks, but I’m still not prepared...”
“I’m not actually good at this. They’re going to see right through me...”
If any of these thoughts resonate with you, you're not alone. They are so common they have a name: impostor syndrome.
It’s that feeling like you’re on the verge of being exposed for what you really are—an impostor. A fraud.
Impostor syndrome is like kryptonite to coding interviews. It makes you give up and go silent.
You might stop asking clarifying questions because you’re afraid they’ll sound too basic. Or you might neglect to think out loud at the whiteboard, fearing you’ll say something wrong and sound incompetent.
You know you should speak up, but the fear of looking like an impostor makes that really, really hard.
Here’s the good news: you’re not an impostor. You just feel like an impostor because of some common cognitive biases about learning and knowledge.
Once you understand these cognitive biases—where they come from and how they work—you can slowly fix them. You can quiet your worries about being an impostor and keep those negative thoughts from affecting your interviews.

Everything you could know

Here’s how impostor syndrome works.
Software engineering is a massive field. There’s a huge universe of things you could know. Huge.
In comparison to the vast world of things you could know, the stuff you actually know is just a tiny sliver:
That’s the first problem. It feels like you don’t really know that much, because you only know a tiny sliver of all the stuff there is to know.

The expanding universe

It gets worse: counterintuitively, as you learn more, your sliver of knowledge feels like it's shrinking.
That's because you brush up against more and more things you don’t know yet. Whole disciplines like machine learning, theory of computation, and embedded systems. Things you can't just pick up in an afternoon. Heavy bodies of knowledge that take months to understand.
So the universe of things you could know seems to keep expanding faster and faster—much faster than your tiny sliver of knowledge is growing. It feels like you'll never be able to keep up.

What everyone else knows

Here's another common cognitive bias: we assume that because something is easy for us, it must be easy for everyone else. So when we look at our own skills, we assume they're not unique. But when we look at other people's skills, we notice the skills they have that we don't have.
The result? We think everyone’s knowledge is a superset of our own:
This makes us feel like everyone else is ahead of us. Like we're always a step behind.
But the truth is more like this:
There's a whole area of stuff you know that neither Aysha nor Bruno knows. An area you're probably blind to, because you're so focused on the stuff you don't know.

We’ve all had flashes of realizing this. For me, it was seeing the back end code wizard on my team—the one that always made me feel like an impostor—spend an hour trying to center an image on a webpage.

It's a problem of focus

Focusing on what you don't know causes you to underestimate what you do know. And that's what causes impostor syndrome.
By looking at the vast (and expanding) universe of things you could know, you feel like you hardly know anything.
And by looking at what Aysha and Bruno know that you don't know, you feel like you're a step behind.
And interviews make you really focus on what you don't know. You focus on what could go wrong. The knowledge gaps your interviewers might find. The questions you might not know how to answer.
But remember:
Just because Aysha and Bruno know some things you don't know, doesn't mean you don't also know things Aysha and Bruno don't know.
And more importantly, everyone's body of knowledge is just a teeny-tiny sliver of everything they could learn. We all have gaps in our knowledge. We all have interview questions we won't be able to answer.
You're not a step behind. You just have a lot of stuff you don't know yet. Just like everyone else.

4) The 24 Hours Before Your Interview

Feeling anxious? That’s normal. Your body is telling you you’re about to do something that matters.

The twenty-four hours before your onsite are about finding ways to maximize your performance. Ideally, you wanna be having one of those days, where elegant code flows effortlessly from your fingertips, and bugs dare not speak your name for fear you'll squash them.
You need to get your mind and body in The Zone™ before you interview, and we've got some simple suggestions to help.
5) Why You're Hitting Dead Ends In Whiteboard Interviews

The coding interview is like a maze

Listening vs. holding your train of thought

Finally! After a while of shooting in the dark and frantically fiddling with sample inputs on the whiteboard, you've came up with an algorithm for solving the coding question your interviewer gave you.
Whew. Such a relief to have a clear path forward. To not be flailing anymore.
Now you're cruising, getting ready to code up your solution.
When suddenly, your interviewer throws you a curve ball.
"What if we thought of the problem this way?"
You feel a tension we've all felt during the coding interview:
"Try to listen to what they're saying...but don't lose your train of thought...ugh, I can't do both!"
This is a make-or-break moment in the coding interview. And so many people get it wrong.
Most candidates end up only half understanding what their interviewer is saying. Because they're only half listening. Because they're desperately clinging to their train of thought.
And it's easy to see why. For many of us, completely losing track of what we're doing is one of our biggest coding interview fears. So we devote half of our mental energy to clinging to our train of thought.
To understand why that's so wrong, we need to understand the difference between what we see during the coding interview and what our interviewer sees.

The programming interview maze

Working on a coding interview question is like walking through a giant maze.
You don't know anything about the shape of the maze until you start wandering around it. You might know vaguely where the solution is, but you don't know how to get there.
As you wander through the maze, you might find a promising path (an approach, a way to break down the problem). You might follow that path for a bit.
Suddenly, your interviewer suggests a different path:
But from what you can see so far of the maze, your approach has already gotten you halfway there! Losing your place on your current path would mean a huge step backwards. Or so it seems.
That's why people hold onto their train of thought instead of listening to their interviewer. Because from what they can see, it looks like they're getting somewhere!
But here's the thing: your interviewer knows the whole maze. They've asked this question 100 times.

I'm not exaggerating: if you interview candidates for a year, you can easily end up asking the same question over 100 times.
So if your interviewer is suggesting a certain path, you can bet it leads to an answer.
And your seemingly great path? There's probably a dead end just ahead that you haven't seen yet:
Or it could just be a much longer route to a solution than you think it is. That actually happens pretty often—there's an answer there, but it's more complicated than you think.

Hitting a dead end is okay. Failing to listen is not.

Your interviewer probably won't fault you for going down the wrong path at first. They've seen really smart engineers do the same thing. They understand it's because you only have a partial view of the maze.
They might have let you go down the wrong path for a bit to see if you could keep your thinking organized without help. But now they want to rush you through the part where you discover the dead end and double back. Not because they don't believe you can manage it yourself. But because they want to make sure you have enough time to finish the question.
But here's something they will fault you for: failing to listen to them. Nobody wants to work with an engineer who doesn't listen.
So when you find yourself in that crucial coding interview moment, when you're torn between holding your train of thought and considering the idea your interviewer is suggesting...remember this:
Listening to your interviewer is the most important thing.
Take what they're saying and run with it. Think of the next steps that follow from what they're saying.
Even if it means completely leaving behind the path you were on. Trust the route your interviewer is pointing you down.
Because they can see the whole maze.
6) How To Get The Most Out Of Your Coding Interview Practice Sessions
When you start practicing for coding interviews, there’s a lot to cover. You’ll naturally wanna brush up on technical questions. But how you practice those questions will make a big difference in how well you’re prepared.
Here’re a few tips to make sure you get the most out of your practice sessions.
Track your weak spots
One of the hardest parts of practicing is knowing what to practice. Tracking what you struggle with helps answer that question.
So grab a fresh notebook. After each question, look back and ask yourself, “What did I get wrong about this problem at first?” Take the time to write down one or two things you got stuck on, and what helped you figure them out. Compare these notes to our tips for getting unstuck.
After each full practice session, read through your entire running list. Read it at the beginning of each practice session too. This’ll add a nice layer of rigor to your practice, so you’re really internalizing the lessons you’re learning.
Use an actual whiteboard
Coding on a whiteboard is awkward at first. You have to write out every single character, and you can’t easily insert or delete blocks of code.
Use your practice sessions to iron out that awkwardness. Run a few problems on a piece of paper or, if you can, a real whiteboard. A few helpful tips for handwriting code:

Set a timer
Get a feel for the time pressure of an actual interview. You should be able to finish a problem in 30–45 minutes, including debugging your code at the end.
If you’re just starting out and the timer adds too much stress, put this technique on the shelf. Add it in later as you start to get more comfortable with solving problems.
Think out loud
Like writing code on a whiteboard, this is an acquired skill. It feels awkward at first. But your interviewer will expect you to think out loud during the interview, so you gotta power through that awkwardness.
A good trick to get used to talking out loud: Grab a buddy. Another engineer would be great, but you can also do this with a non-technical friend.
Have your buddy sit in while you talk through a problem. Better yet—try loading up one of our questions on an iPad and giving that to your buddy to use as a script!
Set aside a specific time of day to practice.
Give yourself an hour each day to practice. Commit to practicing around the same time, like after you eat dinner. This helps you form a stickier habit of practicing.
Prefer small, daily doses of practice to doing big cram sessions every once in a while. Distributing your practice sessions helps you learn more with less time and effort in the long run.
part -2 will be upcoming in another post !
submitted by Cyberrockz to u/Cyberrockz [link] [comments]

[META] The Rules and their Entirety

These are the rules, everything that pertains to everyone who wishes to make any sort of interaction within this sub. Per the last META, clarity has been given in regards to bulk-type sales. Since EVERYTHING is here for you all to read, we expect there to be less issues with rule infractions and general confusion as to what’s acceptable, and what isn’t. We devote our time and energy for this sub to continuously never reach a balance amongst the users.
Our goal is to ensure the subreddit itself sticks around, along with trying to keep the userbase from being taken advantage of. Our rules make sense to some, and none to others but they serve a purpose. Regardless of how you feel, these are the rules and it is expected they be followed. At the time this post becomes visible, all of what’s listed below will be enforced as a hard rule, no more wrist slaps or babysitting.

Reporting Rules

Here are the Subreddit Reportable violations. Violating these rules will get you a ban.

Reddit Rules:

Reddit Rules regarding Firearms
No firearm sales. No Ammunition sales. No primers or gunpowder, as they are considered explosives.
No selling or distributing of files related to 3D printed firearms.
If you have no idea what this is referring to, please educate yourself before posting anything related to 3D printing files by reading up on them at the following websites:
Firearms: A Firearm is considered the serialized receiver or assembly of a working firearm. If you are unsure if an item is prohibited, contact the mods prior to posting it.
80% lowers and completion kits are not included in this prohibition as they are not firearms yet.
Bump-Stocks are considered Machine Guns by the ATF and are therefore prohibited from trading on the sub.
Binary Triggers, Cranks, and Rubber bands and other such items are not (currently) affected by this prohibition (unless Admins change their minds later).
Explosives & Hazmat: Gunpowder and Live Primers are considered as explosives and Hazardous Materials and are therefore prohibited from trade.
Ammunition: Reddit Admins use the ATF definition of ammunition which is as follows:
The term “Ammunition” means ammunition or cartridge cases, primers, bullets, or propellant powder designed for use in any firearm. The term shall not include (a) any shotgun shot or pellet not designed for use as the single, complete projectile load for one shotgun hull or casing, nor (b) any unloaded, non-metallic shotgun hull or casing not having a primer. 27 § 478.11
Brass and projectiles posted here will result in an immediate suspension by Reddit Admins, so if we find it first we will remove it.
Any violation of these above rules will result in a ban by us, or a site-wide suspension by Admins and their Anti-Evil goosesteppers.
Anyone attempting to skirt Reddit Rules will be given a 7 day ban on the first offense, a 30 day ban on the second offense, and a permaban thereafter due to the fact that Admins will use the bad behavior of a few to justify shutting down the sub for good.

Posting Rules:

This sub is for private sales only. Vendors must post in Gundeals or GunAccessoryVendors
Clarification on Vendor Rule: Don't include links to your business website, we are not a referral system, do your business on here. Please see the Reddit Self Promotion page for details on that. Reddit admins don't like you cutting in on their ad revenue. We do not support VENDORS, I.E. if you buy another company's products in bulk (such as Magpul), and just act as a distributoreseller, your business is not welcome here. That is /GunDeals territory. If you have an FFL, you cannot do business on here because are considered a firearm business, and cannot solicit any transactions involving firearms.
The limit on bulk sales/bulk items is 10, that means 10 of the same individual item can be posted for sale or trade. If you have 10 Geissele triggers, but only 4 are flat and 6 are curved, that will still count as 10, as they're the same branded trigger and likely purchased at the same time. If there are 3 OD Green items and 7 FDE that are otherwise the same item, that still count as 10. If you post 10 items of the same in one day, 10 the next, and 10 the following day after that, that will be viewed as vendor activity. To keep such things from happening, it will be limited to one sale of this type, per user, per week. The ONLY EXCEPTION to this rule is old magazines, as it is common for users to purge off part of their mag collection.
Please follow these rules when creating a listing: Prefix your title with the transaction type:
[WTS] - Want To Sell
[WTB] - Want To Buy
[WTT] - Want To Trade
[GIFT] - Gun It Forward Tactically
Suffix your title with your state (e.g. (GA) or (NY)). This will help incentivize local sales and could impact shipping costs. Also, it could affect legality of some items such as magazines and those accessories deemed as "assault weapon" parts by certain states.
Postings should all follow this general format as an example: "[WTS] M16A2 Carry Handle - $60 (VA)". If you do not list the price in the title, ensure that it is listed in the comments. Include a Dollar sign ($) or the bot will remove it.
Postings without a price value may be removed after a period of time. WTB posts require valid offering prices, and will be removed if they do not have one.
Postings with prices such as "$1 for the bot" or "$1,000,000 for the bot" that are intended to bypass our rules and automated removal system instead of posting a valid price, will be removed and a temporary ban will be issued immediately.
Postings without pictures will be removed immediately, unless these posts are WTB.
Do not post an item for sale if you do not have it in your possession at the time of posting. This includes an item you may have purchased elsewhere, you decided you don’t want it and it’s on its way to you, but it has yet to arrive. If you don’t have it, don’t post it.
If you post stock images of an item in your WTS/WTT post, that will result in a temp ban if it is your first time doing so, possibly permanent if done on multiple occasions. If you post images of someone else’s photos for “your” item, this will be viewed as scamming tactics and you will receive a permaban, immediately.
If you drop your price, use the Price Drop/NSFW Tag. If your items sell, use the Complete/Spoiler tag. Please don't delete the price of an item if it sells, because that can be used by people in the future to gauge what similar items may be worth.
If your post does not receive the traction you're wanting, refrain from reposting within a 24 hour time frame. You may repost after the 24 hours has passed, and a price drop is not required, but encouraged. Deleting your post and reposting afterwards is viewed as trying to evade this rule. It will be met with removal and a temp ban, possibly longer if done more than once.
Want to Buy/Sell/Trade (WTB/WTS/WTT): These transactions all require a price value for the item. If a listing does not include a price it may be removed and re-listed once it is in compliance. Giving an unrealistic price to avoid this rule will be treated as a rule violation. Examples of this are "WTB scope, $1" or "WTT Upper, $9999". Additionally, you must list what you are looking for in [WTT] posts. Fielding offers, testing the waters or any other post attempt to try and skirt this rule will result in the post being removed.
Gifting items forward: (GIFT) If you have small odds and ends that aren't worth much and the cost of shipping is prohibitive, you are allowed to offer items for free. The gifter is allowed to request compensation for shipping only, and can request a flair upgrade in the feedback thread for the transaction. If the receiver pays for shipping, they can also request a flair upgrade, but if they get the item for free, no flair upgrades for the recipient. Flair upgrades of this type are limited in order to avoid abuse, i.e. giving away 20 A2 grips in order to get +20 rep is not authorized.
Accounts with 5 or less flair (you must have at least 6) on GAFS are NOT eligible to participate in giveaways, due to users from other subs coming to win stuff without ever participating in GAFS, or GAFS users making multiple new burner accounts to enter giveaways.
New accounts (under 30 days of age) are not able to create WTS or WTT ads, nor should they offer things for sale in the comments of other peoples' posts. To prevent scams, new users can only post Want to Buy threads. If you want to attempt to bypass this account age requirement, you must be able to provide moderators evidence of a good trading history on another reputable online forum, such as Calgunner or AR15.com where you can show a longstanding history of positive trade feedback. If this is completed, moderators may provide an exception and allow WTS/WTT posts to be submitted by new users, with a warning caveat to any potential buyers to avoid using risky payment methods until the seller has had a chance to develop a positive trading reputation.
Any new accounts that utilize this subreddit that create names that are similar to a mods (i.e. sxbbzxro, sxbzxxro, subzxro, etc.) may be removed from participating here due to the possibility of confusing/having the ability to manipulate users into thinking they are in fact a mod.
Price Checks (PC): Because PC listings were abused by many to bypass the price rule, fish for "best offers", and otherwise snipe sales, they have been disabled after overwhelming support from the community.
We have a feedback system in place. The current month's flair thread is On the Sidebar, and is usually Stickied at the top as well. Check there for the specific directions. DO NOT create a thread for a sale that has already happened, or has happened in a different sub/website/forum etc. The Flair system is only for feedback for exchanges in /GAFS. Any attempts to game the flair system will be seen as an attempt to establish trust for scam purposes, and will be banned accordingly.
Law Enforcement: Be aware, we do not offer exemptions to any individuals who may have LE credentials. Due to the difficulty of verifying employment, possible job changes, leaving/termination from said job, etc. we treat all users as civilians. Any local and federal laws apply to all individuals who utilize this subreddit. Read up and stay up-to-date on these laws and regulations, you will be expected to know and abide by them. Failure to do so may lead to a ban.
External Sales:
NO LINKS to your external sales on TacSwap, eBay, Facebook, Armslist, Gunbroker, etc. Sales in multiple locations are allowed, but don't just provide a link to sale elsewhere. Make your listing here. The only caveat to these rules is to show a price point elsewhere if someone here has an item that is grossly overpriced, or is looking for an item.
This sub is not a "highest bid gets the item" format. There are also no lotteries for items i.e. 10 chances at $10 each to purchase a $75 flashlight with a random number generated to pick the winner.
High Value or Counterfeit Items:
To deter the sale of counterfeit products, any item that is serialized must have a picture of the serial. As firearms are not allowed for sale here, this shouldn't present a privacy issue to anyone. This policy covers items such as EOTechs, Aimpoints, Trijicons, etc. Along with this, if you're selling anything that's "new-in-box", you must unseal it and show the contents of said box/package.
No Stolen Property. If you are selling a knockoff item, indicate that fact. Items such as bipods, BUIS, flashlights, holsters, and scopes/optics are known to have some gray market options. KAC USMC Stamped Rear Sights are not stolen property and are allowed on here, unless another member can provide proof from a DoD source that they are in fact considered stolen government property.
All GAFS logos, icons, banners and visual content related to this subreddit, belong to the moderator team. Do not create/manufacture/produce items with this content onto itself. It is forbidden to profit off the GAFS name, unless discussed with the modteam in advance and given permission.

Shipping/Insurance Rules:

The official policy is for the mods to not get involved with issues regarding lost packages, provided that the parties can prove it was actually lost. If you feel like insurance should be added to your transaction, please take care to add that before finalizing terms.

General Rules:

WARNING: Be aware of all state and federal laws that apply to you and any parties involved in a firearms-related transaction. You are responsible for knowing and following the law. This Subreddit and its staff are in no way responsible for informing you of the law, but will make every effort to do so. As a buyer, be familiar with your state/county/city rules. As a seller, do not knowingly sell prohibited items to areas that have laws against your items, such as certain capacity magazines. Any person, buyer, or seller, who knowingly solicits a trade that is illegal for them may be subject to a ban.
Respect all federal and local laws for any transaction you take part in. This includes federal drug laws. Drug activity tied to your account tied to any other issues is sufficient grounds for banning. Here is the ATF Letter that explains why any suspected drug activity, including marijuana, is grounds for immediate banning from the sub. Illegal gun activity such as unregistered SBRs, AOWs, destructive devices, DIAS or lightning links in your reddit profile (in or outside the sub) can be reason for banning. Do not spread bad information regarding laws.
Any item you post for sale is expected to be in your current possession. If this is not the case, you must specify this in the listing. Circumstances such as selling for a friend is allowed, but pictures of your items are required to be shared to the public. You do not need an imgur.com account in order to host pictures of your item on imgur, so that is not an excuse.
If you are scammed, inform the mods as soon as you can so that we may investigate and ban the offending parties if necessary.
Do not post the personal information of any Reddit users. The exception to this is if someone uses PayPal to scam a member, this information may be sent to the mods to prevent others from also being scammed. Doxxing people will not be tolerated.
Do not antagonize posters about their price, opinion, or sexual orientation (etc). This translates to be a general rule of "no dickish behavior". If you disagree with someone's price, and can post evidence that their item has a current or recent better price elsewhere such as a link to a vendor, that information is authorized to be posted. That is not antagonism. People may comment on prices and offer counter-offers, as long as behavior is not insulting or unprofessional. If you feel that someone is being unprofessional regarding pricing, report it and the mods will evaluate the case. They are the determining factor whether behavior warrants muting, temporary banning, or permanent banning based on severity of incident, past behavior, and other factors. If your behavior does not contribute towards the positive image of firearms ownership, your participation in this subreddit may not be welcome.
Soliciting any type of transaction regarding prohibited items may result in a ban. This includes Price Checks of firearms and other prohibited items, as this can be seen as an attempt to garner PM offers for prohibited items. Remember that there is no expectation of privacy from Reddit Admins, and that they have shown in the past that they have access to private message histories.
As a general guideline, if a buyer wants to use PayPal Goods and Services (G&S) rather than Friends and family (F&F), it is expected that they will absorb the ~3% fee for the increased protections. However, PayPal F&F, Zelle, and Venmo and similar payment methods are discouraged here due to a lack of protections.
All rules and guidelines are subject to change. The moderators have the final say in all issues in relation to the rules and how to enforce them.
submitted by SxbZxro to GunAccessoriesForSale [link] [comments]

what is this i just downloaded (youtube code?)

so this is kinda a wierd story. I was planning to restart my computer. (cant remember why) I spend most of my time watching youtube videos so i had alot of tabs open. So i was watching the videos then deleting the tab but not opening new tabs. So i was down 2 i think 1 it was a pretty long video so i tried to open a youtube home page tab just to look while i listened to the video. And this is a short exerp of what i got.





YouTube











submitted by inhuman7773 to techsupport [link] [comments]

more related issues


more related issues
in the conversion of old and new systems, the most difficult one is uuuuuuuuuuuuuuu.

  1. Among the following options, the one that does not belong to the combination of two parameters, one change and three combinations:
    the form control that can accept numerical data input is.

Internal gateway protocol is divided into: distance vector routing protocol, and hybrid routing protocol.

Firewall can prevent the transmission of infected software or files
among the following coupling types, the lowest coupling degree is ().

The () property of the Navigator object returns the platform and version information of the browser.

What are the main benefits of dividing IP subnets? ()
if users want to log in to the remote server and become a simulation terminal of the remote server temporarily, they can use the
[26-255] software life cycle provided by the remote host, which means that most operating systems, such as DOS, windows, UNIX, etc., adopt tree structureFolder structure.

An array is a group of memory locations related by the fact that they all have __________ name and __________ Type.
in Windows XP, none of the characters in the following () symbol set can form a file name. [2008 vocational college]
among the following options, the ones that do not belong to the characteristics of computer viruses are:
in the excel 2010 cell Format dialog box, the nonexistent tab is
the boys___ The teacher talked to are from class one.
for an ordered table with length of 18, if the binary search is used, the length of the search for the 15th element is ().

SRAM memory is______ Memory.

() is a website with certain complementary advantages. It places the logo or website name of the other party's website on its own website, and sets the hyperlink of each other's website, so that users can find their own website from the cooperative website and achieve the purpose of mutual promotion.

  1. Accounting qualification is managed by information technology ()
    which of the following devices can forward the communication between different VLANs?

The default port number of HTTP hypertext transfer protocol is:
forIn the development method of object, () will be the dominant standard modeling language in the field of object-oriented technology.

When you visit a website, what is the first page you see?

File D:\\ city.txt The content is as follows: Beijing Tianjin Shanghai Chongqing writes the following event process: privatesub form_ click() Dim InD Open \d:\\ city.txt \For input as ? 1 do while not EOF (1) line input ? 1, Ind loop close 1 print ind End Sub run the program, click the form, and the output result is.

When users use dial-up telephone lines to access the Internet, the most commonly used protocol is.

In the I2C system, the main device is usually taken by the MCU with I2C bus interface, and the slave device must have I2C bus interface.

The basic types of market research include ()
the function of the following program is: output all integers within 100 that can be divisible by 3 and have single digits of 6. What should be filled in the underline is (). 56b33287e4b0e85354c031b5. PNG
the infringement of the scope of intellectual property rights is:
multimedia system is a computer that can process sound and image interactivelySystem.

In order to allow files of different users to have the same file name, () is usually used in the file system.

The following () effects are not included in PowerPoint 2010 animation effects.

Macro virus can infect________ Documents.

The compiled Java program can be executed directly.

In PowerPoint, when adding text to a slide with AutoShape, how to indicate that text can be edited on the image when an AutoShape is selected ()
organizational units can put users, groups, computers and other units into the container of the active directory.

Ethernet in LAN adopts the combination technology of packet switching and circuit switching. ()
interaction designers need to design information architecture and interface details.

In the process of domain name resolution, the local domain name server queries the root domain name server by using the search method.

What stage of e-commerce system development life cycle does data collection and processing preparation belong to?

Use the "ellipse" tool on the Drawing toolbar of word, press the () key and drag the mouse to draw a circle.

The proportion of a country's reserve position in the IMF, including the convertible currency part of the share subscribed by Member States to the IMF, and the portion that can be paid in domestic currency, respectively.

  1. When installing Windows 7 operating system, the system disk partition must be in format before installation.

High rise buildings, public places of entertainment and other decoration, in order to prevent fire should be used____。 ()
with regard to the concept of area in OSPF protocol, what is wrong in the following statements is ()
suppose that the channel bandwidth is 4000Hz and the modulation is 256 different symbols. According to the Nyquist theorem, the data rate of the ideal channel is ()
which of the following is the original IEEE WLAN standard ()?

What is correct about data structure is:
the key deficiency of waterfall model is that ().

The software development mode with almost no product plan, schedule and formal development process is
in the following description of computers, the correct one is ﹥
Because human eyes are sensitive to chroma signal, the sampling frequency of luminance signal can be lower than that of chroma signal when video signal is digitized, so as to reduce the amount of digital video data.

[47-464] what is correct in the following statements is
ISO / IEC WG17 is responsible for the specific drafting, discussion, amendment, formulation, voting and publication of the final ISO international standards for iso14443, iso15693 and iso15693 contactless smart lock manufacturers smart card standards.

Examples of off - balance - sheet activities include _________

The correct description of microcomputer is ().

Business accident refers to the accident caused by the failure of operation mechanism of tourism service department. It can be divided into ().

IGMP Network AssociationWhat is the function of the discussion?

Using MIPS as the unit to measure the performance of the computer, it refers to the computer______

In the excel workbook, after executing the following code, the value of cell A3 of sheet 1 is________ Sub test1() dim I as integer for I = 1 to 5 Sheet1. Range (\ \ a \ \ & I) = I next inend sub
What are the characteristics of electronic payment compared with traditional payment?

When the analog signal is encoded by linear PCM, the sampling frequency is 8kHz, and the code energy control unit is 8 bits, then the information transmission rate is ()
  1. The incorrect discussion about the force condition of diesel engine connecting rod is.

Software testing can be endless.

The game software running on the windows platform of PC is sent to the mobile phone of Android system and can run normally.

The following is not true about the video.

The way to retain the data in the scope of request is ()
distribution provides the basis and support for the development of e-commerce.

  1. Which of the following belong to the content of quality control in the analysis
    1. During the operation of a program, the CNC system appears "soft limit switch overrun", which belongs to
    2. The wrong description of the gas pipe is ()
    3. The following statement is wrong: ()
    the TCP / IP protocol structure includes () layer.

Add the records in table a to table B, and keep the original records in table B. the query that should be used is.

For additives with product anti-counterfeiting certification mark, after confirming that the product is in conformity with the factory quality certificate and the real object, one copy () shall be taken and pasted on the ex factory quality certificate of the product and filed together.

() accounts are disabled by default.

A concept of the device to monitor a person's bioparameters is that it should.
  1. For the cephalic vein, the wrong description is
    an image with a resolution of 16 pixels × 16 pixels and a color depth of 8 bits, with the data capacity of at least______ Bytes. (0.3 points)
  2. What are the requirements for the power cord of hand-held electric tools?

In the basic mode of electronic payment, credit card belongs to () payment system.

The triode has three working states: amplification, saturation and cut-off. In the digital circuit, when the transistor is used as a switch, it works in two states of saturation or cut-off.

Read the attached article and answer the following: compared with today's music, those of the past
() refers to the subjective conditions necessary for the successful completion of an activity.

In the OSI reference model, what is above the network layer is_______ 。

The decision tree corresponding to binary search is not only a binary search tree, but also an ideal balanced binary tree. In order to guide the interconnection, interoperability and interoperability of computer networks, ISO has issued the OSI reference model, and its basic structure is divided into
26_______ It belongs to the information system operation document.

In C ? language, the following operators have the highest priority___ ?
the full Chinese name of BPR is ()
please read the following procedures: dmain() {int a = 5, B = 0, C = 0; if (a = B + C) printf (\ * * \ n \); else printf (\ $$n \);} the above programs
() software is not a common tool for web page making.

When a sends a message to B, in order to achieve security, a needs to encrypt the message with ().

The Linux exchange partition is used to save the visited web page files.

  1. Materials consumed by the basic workshop may be included in the () cost item.

The coverage of LAN is larger than that of Wan.

Regarding the IEEE754 standard of real number storage, the wrong description is______

Task 4: convert decimal number to binary, octal and hexadecimal number [Topic 1] (1134.84375) 10 = () 2=()8 = () 16
the purpose of image data compression is to ()
in IE browser, to view the frequently visited sites that have been saved, you need to click.

  1. When several companies jointly write a document, the document number of each company should be quoted in the header at the same time. ()
    assuming that the highest frequency of analog signal is 10MHz, and the sampling frequency must be greater than (), then the sample signal can not be distorted.

The incredible performing artist from Toronto.
in access, the relationship between a table and a database is.

In word 2010, the following statement about the initial drop is correct.

Interrupt service sub function does not need to be called in the program, but after applying for interrupt, the CPU automatically finds the corresponding program according to the interrupt number.

Normal view mode is the default view mode for word documents.

A common variable is defined as follows: Union data {int a; int b; float C;} data; how much memory space does the variable data occupy in VC6.0?

______ It is not a relational database management system.

In the basic model of decision support system, what is in the core position is:
among the following key factors of software outsourcing projects, () is the factor that affects the final product quality and production efficiency of software outsourcing.

Word Chinese textThe shortcut for copying is ().
submitted by Amanda2020-jumi to u/Amanda2020-jumi [link] [comments]

Crypto currency market insights and also Details worrying ThisOption

Crypto currency market insights and also Details worrying ThisOption
Cryptocurrency is now the impressive cashless solution. Thisoption is an item of the money formula modern-day innovation all over the world company (Finalgo Inc.).
The circulation of money.
Coins as well as banknotes in each country along with region have various kinds of blood circulation in addition to various well worth. Today, concerning 180 different cash are dispersing worldwide. Together with the above cash money, there are a good deal more that 5000+ cryptocurrencies produced to use the modern 4.0 technology today with Blockchain modern-day innovation along with Smart Dealings. Cryptocurrency- the extraordinary settlement service in a cashless society.

https://preview.redd.it/5zul32sviji51.png?width=960&format=png&auto=webp&s=814f98d655109e1f9d67c1a1b6aaecbac42a8588
What is cryptocurrency.
Cryptocurrency or crypto is a name made use of to define all the coins on the digital market. There are similarly various other names, such as encrypted cash, however, in my point of view, almost among the most appropriate term is "cryptocurrency".
Crypto is made to operate as a minimum of exchange. It utilizes cryptographic solutions to protect details, verify deals, in addition to manage the development of brand-new units of a specified cryptocurrency. Crypto worth devices are subsequently secured from kind of scams or scams while being able to conceal customers' acquisitions info.
Crypto advantages in negotiations.
Minimized trading costs.
No chance of raising cost of living or being fake.
Quick acquisition rate.
Not taken care of by federal government federal governments.
Indeterminate trading.
Thisoption exchange introduction; Info pertaining to Thisoption.
• Developed time: 2016, Head office: Highway: 926 Adelaide St.
• City: Toronto.
• Area: Ontario.
• Postal Code: M5H 1P6.
• Get in touch with number: 416-- 933-- 7770.
• 926 Adelaide St, Ontario, M5H 1P6 Toronto, Canada.
• ThisOption is an item from Firm: Cash Formula Modern Technology International (Finalgo Inc).
• Down payment as well as additionally withdrawal selections: Visa, Mastercard, Cryptocurrency, Local Banks, Atm, Internet banking, Perfect Cash.
• Main account cash: USD, EUR, RUB. Trading residential or commercial properties: Greater than 500 classifications containing cash, properties, index, products.
• Binary selections: High/ Lessened (Call/ Put), Turbo.
• Minimum down payment: $ 10.
• Account kinds: Trial Account, Real Account, VIP Account.

https://preview.redd.it/ye40bk9uiji51.png?width=785&format=png&auto=webp&s=6a0da0881e118e743018a196b2194b2385eda70c
Thisoption Roadmap.
2016.
• Thisoption was founded in Canada.
2017.
Thisoption reached 20,000 individuals as well as was present in 10 countries.
2018.
• Thisoption released a duplicate trading item.
2019.
• Thisoption launched the MIB method for area renovation.
2020.
• Introducing the HEAPS Token Coin.
• Changing LARGE AMOUNTS right into the primary coin on thisoption.com.
• June 2020: ThisOption reaches a plan moneyed by NFA (American Derivatives Exchange) as well as additionally opens up a brand-new head office in the UK.
• Introducing TONSTRADER as well as consisting of settlement sites for Visa along with MasterCard.
• Area PLENTIES right into usage on LOTS OCCUPATION.
• Developing an Eastern license as well as additionally representative workplace in Singapore.
• Putting LARGE AMOUNTS on 2 significant cryptocurrency exchanges worldwide.
• Issuing TUSD, a protected coin on Thisoption, working as the 2nd major money in Thisoption area.
• Offering the TONSPAY application.
• Performing LOTS Token in addition to TUSD, Thisoption's Steady Coin, right into TONSPAY as well as additionally EXTONS.
• Providing the TONSP2P exchange.
• Launching TONSFX.

https://preview.redd.it/m5a2fgwsiji51.jpg?width=960&format=pjpg&auto=webp&s=993bc2cf3443b2a358d8034d64dda7be5bc09865
Judgment.
ThisOption is showing an excellent development in cryptocurrency market.
Official links for more details,
Website Link : https://www.extons.io
Thisoption binary exchange : https://thisoption.com
Whitepaper Link : https://www.extons.io/whitepaper
Twitter Link : https://twitter.com/thisoption
Telegram Link : https://t.me/thisoption
ANN Threads Link : https://bitcointalk.org/index.php?topic=5263768
Facebook Link: https://www.facebook.com/thisoptionexchange
Youtube Link: https://www.youtube.com/channel/UCb6ufyQv-hs5BcUx6j0q70Q
Medium Link: https://medium.com/@thisoption.com
Bitcointalk Username : kylieriley
My Bitcointalk Profile Link : https://bitcointalk.org/index.php?action=profile;u=2382224
submitted by zaydenrowan to CryptoICONews [link] [comments]

Restore or Fix 365 Binary Option - YouTube Binary Options Trading Reviews - YouTube Binary Options Reporter - YouTube

How to set a binary registry value (REG_BINARY) with PowerShell? Background: I need to change some properties of the ASP.NET State service using a PowerShell script. Unfortunately, the built-in PowerShell cmdlet Set-Service only lets you modify the service description, startup type, display name, and status. I have a list of file extensions that I need to enable the "confirm open after download" & "always show extension" options on. the list is about 50 extensions and I need to set this on approx 100 W2k3 servers in the domain (2 are standalone). this is a labor intensive task to perform manually in... Binary Options Trading Guide. On this page, we will go through the basics of binary options trading. When trading with a binary option robot, you do not necessarily need to know anything about binary options investing, but it is useful to be aware of the mechanism by which option robot operates. Plus, if you are interested in binary options trading so much that you do not want to use the robot ... Set-Location -LiteralPath 'HKCU:\Control Panel\Desktop' New-ItemProperty -Path '.' -Name 'UserPreferencesMask' -Value [[byte[]] [0x90,0x12,0x03,0x80,0x0A,0x10,0x00,0x00]] -PropertyType "Binary" -Force. I’ve tried putting the value into a variable in numerous ways, but it’s only accepted with the New-ItemProperty method. If a property exposes a type that implements ICollection<> (and is not an ICollection<> itself, as for IDictionary above, though that makes sense in this case), then it is a candidate for binding. In order to add an item to the collection, reflection is used to invoke an Add method on the type: var addMethod = typeInfo. GetDeclaredMethod ("Add ... I need to to programmatically (ideally via PowerShell) configure Outlook setting the options: "When sending e-mail, check address lists in this order:" to "Start with contact folder... Best method to take save a string from a registry key REG_BINARY value. ShawnMarx over 8 years ago. I was writing a script which had the overall purpose of copying from a network location a pre-setup signature block for Outlook, setting it as the default, and then setting the fonts. This way we have in the company one consistent look for outbound emails. I'm pretty new to Powershell - as I've ... New Item Property Propertytype Binary Options Ich versuche, ein Element mit Set-ItemProperty in PowerShell zu erstellen, das auf den meisten Systemen funktioniert. Dies schafft einen DWORD-Wert auf den meisten Windows 7-Systemen, aber ich habe ein System gefunden, wo dies stattdessen einen STRING-Wert erzeugt und ich möchte Wissen, warum was passieren könnte, dass sich die Systeme anders ... It demonstrated with an example of how new keys are created, deleted and values are changed. It also showed how to add registry entries to keys, how a registry key value can be changed and deleted. All the operations are illustrated with an appropriate example. To learn more in detail it is advisable to write sample scripts and work on them. The article also demonstrated bulk-adding and ... Then you could construct a new instance of a MyCarObject, and use this method to determine if an equivalent object (as determined by compare:) is already in the list. Note that this method does a binary search, so the array must be kept sorted using the same comparator that you are using to search it.

[index] [3855] [15343] [19898] [10705] [22657] [21518] [16636] [1121] [7875] [27750]

Restore or Fix "New" Option Missing from the Right-click ...

All about binary options trading. Learn to trade binary options correctly. We’ll talk about strategies, indicators and technical analysis in your language. News Live Fashion ... This means that even if you decide to take part in newer forms of investment like binary options trading, you may be making the decisions yourself, and you may even be ... 👨‍🏫 Join this channel to get access to perks: Online Programming Courses! 🎓 https://www.youtube.com/channel/UCb3Ryh3sdgpDBiVVAgi1I7g/join 🆕 New Online ... Binary Options Trading Reviews.If you are interested in trading and selling stocks, you should seriously consider the benefits of the various options trading... OptionsXO is one of the world’s leading online binary options trading brokers. OptionsXO was founded by a team of financial professionals and pioneers in the internet technology industry. The ... To fix or restore missing "New" Option from the right-click context menu; locate the below registry key: HKEY_CLASSES_ROOT\Directory\Background\shellex\Conte... Binary options system is, with no slightest doubt, a globe-course binary options broker, and you'll be Unquestionably guaranteed you won't look for a more trustworthy associate any where else how ... Binary Options Reporter is your source for the latest news and reviews on binary options brokers, tools, and the financial market. If you want to stay inform... Objective Binary Options Broker Reviews delivered by Professionals. We also have arranged trading platforms toplists with rankings of the Best Binary Options Brokers. Trading for newbies, the best place to learn about trading forex, binary options, and any other markets you can think of. Be sure to check out the new videos...

http://binaryoptiontrade.bandsnohov.ml